Schneider Electric INTERBUS Basic Uživatelský manuál stáhnout pdf (Strana 68)

170 BNO 671 00 / 170 BNO 671 01

Relay output Mechanical and electrical data:

Relay output:

Voltage (output)

Voltage (output):

Relay output:

Switching cycle

Switching cycle:

Construction of relay output

(not to be used for network

isolation)

potential free relay contact

The contacts of the relay output must be fitted with a

protective circuit when dealing with heavy loads, especially

inductive loads (RC combinations, varistor, or, with DC

voltages of a free-wheeling diode).

Operating voltage for relay 24 VDC

Switched current for contact min. 10 mA (only with new contacts)

Resistive load 0.5 A at 125 VAC

0.5 A at 110 VDC

2 A at 24 VDC

Lamp load 0.2 A at 24 VDC

Mechanical 1 x 108, 3/s;

Electrical 1 x 105, 20/min (2 A/30 VDC resistive load)

5 x 105, 20/min (1 A/30 VDC resistive load)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 105 106

Žádné komentáře

Schneider Electric INTERBUS Basic Uživatelský manuál Strana 68