Schneider Electric PowerLogic PM5300 Series Specifikace stáhnout pdf (Strana 29)

63230-507-201 Power Meter 750

03/2007 Section 5—Input/Output Capabilities

Setting Up the Digital Output

Set Up Output for Pulse

Set Up Output for Alarms

1. In SETUP mode, press

###: until D OUT

is visible.

2. Press D OUT.

3. Select OFF or ON for the desired output

mode by pressing

+. Depending on

which mode is set to ON, the other values

change automatically.

4. Select ON for EXT to choose external

mode. For setting up pulse or alarm

output mode, see below.

5. Press OK when output mode is complete



$/3%450

  /+



@,!2-

05,3%

%W4



1. On the DO SETUP screen, select ON for

PULSE.

2. Select the pulse duration option. Values

available are: 10, 50,100, 300, 500, or

1000 MSEC (milliseconds).

3. Select the pulse weight option. Values

available are: 0.01, 0.1, 1, 10, 100, 1000,

or 10000 for kWH/P.

4. Press OK when output setup is complete

to return to the SETUP MODE screen.



05,3%33%450

  /+



+7(0

-3%#



1. On the DO SETUP screen, select ON for

ALARM.

2. Using the

<-- and --> buttons, scroll

through the alarms until you reach the

alarm(s) you want to set.

3. Press

+ to “mark” the selected alarm(s).

When the alarm is selected, asterisks will

appear on either side of the alarm name.

4. Press

1; return to the DO SETUP

screen.

5. Press OK to return to the SETUP MODE

screen.



NUDQJV

 









1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Komentáře k této Příručce

Žádné komentáře

Schneider Electric PowerLogic PM5300 Series Specifikace Strana 29

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Schneider Electric PowerLogic PM5300 Series