
Mounting
975-0239-01-01 4–5
This manual for use by qualified personnel only
Removing the Wiring Compartment Cover
Before mounting, you must remove the wiring compartment cover to access the
mounting holes and the wiring terminals. The wiring compartment cover is
secured with two Phillips #8-32 × 2 ½-inch (63.5 mm) screws on the front cover
of the unit. See Figure 4-2.
Figure 4-1 Minimum Clearance Requirements
6 inches (150 mm) on top and side(s)
Figure 4-2 Removing the Wiring Compartment Cover
Remove screws to access
the field-wiring terminals.
Komentáře k této Příručce