Schneider Electric ALTIVAR 58 TRX Instalační příručka stáhnout pdf (Strana 30)

Chapter 2—Menus VVDED397047USR6/03

2—Adjust Menu 06/2003

There are two types of adjustment parameters: parameters which are

always accessible (fixed adjustment parameters), and parameters

which may be accessible depending on:

• The macro-configuration selected

• The presence of an I/O extension card

• The input and output reassignments

The fixed set of adjustment parameters, shown in Table 6 beginning

on page 30, are accessible in every macro-configuration.

Table 6: 2—Fixed Set of Adjustment Parameters

Parameter Code Description

Adjustment

Range

Factory

Setting

Freq. Ref. - Hz LFr

Local speed control in Hz.

LSP to HSP

Appears when the drive controller command from the

keypad display has been activated using the LCC

parameter in the 4—Control menu (see page 56).

LCU LCU

Local speed control in customer-

defined units.

User

dependant

0.00

Appears when the drive controller command from the

keypad display has been activated using the LCC

parameter in the 4—Control menu (see page 56). This

parameter allows adjustment of the motor speed in

customer-defined units. Use parameter USC: Machine

Coef. to scale the customer unit value (see page 34).

During adjustment, LCUA appears in the lower left-hand

corner of the keypad display.

[1]

= drive controller constant torque output current rating shown on the drive controller

nameplate.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 125 126

Žádné komentáře

Schneider Electric ALTIVAR 58 TRX Instalační příručka Strana 30