Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál stáhnout pdf (Strana 15)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 1 — Overview

Configuration Recommendations

First prepare your program settings using the form in Appendix A at the

back of this manual.

Programming of the ALTIVAR 58 is facilitated by internal checks. In order

to understand and become comfortable with the keypad display, we

recommend that you access the menus and program in the following

order. All of the steps are not obligatory in all cases.

1. Set the 50/60 Hz switch.

2. Select the language.

3. Select the macro-configuration.

4. Select 2 or 3-wire control (4—Control menu).

5. Configure parameters in the 3—Drive Configuration menu.

6. Assign the I/O (5—I/O menu).

7. Configure parameters in the 4—Control menu.

8. Configure switching frequency type in the 3—Drive Configuration

menu.

9. Configure fault management parameters in the 6—Fault menu.

10. Make Communication or Application configurations (if one of these

options is used).

11. Make settings in the 2—Adjust menu.

NOTE: You must ensure that the functions which are programmed are

compatible with the control scheme used.

UNINTENDED EQUIPMENT ACTION

• Parameter changes affect drive controller operation.

• Most parameter changes require pressing ENT. Some parameter

changes, such as reference frequency, take effect as soon as

you press the up or down arrow keys.

• Read and understand this manual before using the keypad

display.

Failure to follow these instructions can result in death, serious

injury, or equipment damage.

WARNING

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 111 112

Žádné komentáře

Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál Strana 15