Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál stáhnout pdf (Strana 49)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 2 — Menus

KeypadCom.

LCC

Allows command of the drive controller

via the keypad display. The STOP/

RESET, RUN, and FWD/REV keys are

No - Yes No

active. The reference speed is given by the LFr parameter (see

page 28). Only the freewheel stop, fast stop,

and stop by DC injection commands remain active at the

terminal strip. If the link between the drive controller and keypad

display is lost, the drive controller will trip on the SLF fault (serial

link fault).

Stop Priorit.

PSt

This function gives priority to the STOP

key on the keypad display no matter

No - Yes Yes

what the command source (terminal strip, keypad display, or

serial link). To change the PSt parameter to No:

1. Display no.

2. Press ENT.

3. The drive controller displays “See manual”.

4. Press the up arrow key, then the down arrow key, then ENT,

then ESC.

When set to No, the stop key on the keypad display will be

inactive. To return to Yes, display Yes then press enter.

DriveAddress

Add

Drive controller address controlled

through the RS-485 port by a MODBUS

device (i.e., without the programming or

operating keypad display).

0 to 31 0

BdRate RS485

tbr

Transmission speed on the RS-485

MODBUS port on the front of the drive

controller.

4800 Bits / second

9600 Bits / second

19200 Bits / second

4800–

9600–

19200–

19200

Table 14: 4—Control Menu: Other Parameters

Parameter Code Description

Adjustment

Range

Factory

Setting

★ These parameters are available only with the I/O extension card installed.

DISABLED STOP COMMAND

Disabling the stop key on the keypad display will prevent the drive

controller from stopping when the stop key is pressed. An external

stop command must be installed to stop the motor.

Failure to follow this instruction can result in death, serious

injury, or equipment damage.

WARNING

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 111 112

Komentáře k této Příručce

Žádné komentáře

Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál Strana 49

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Schneider Electric Altivar 58 VW3-A58101