Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál stáhnout pdf (Strana 7)

VVDED397047US R8/01 ALTIVAR



58 Keypad Display

08/01 Chapter 1 — Overview

CHAPTER 1—OVERVIEW

INTRODUCTION

The ALTIVAR 58 (ATV58) family of adjustable frequency AC drive

controllers is used for controlling three-phase asynchronous motors. The

controllers range from:

• 1–75 hp (0.75–55 kW) constant torque (100 hp variable torque),

400/460 V, three-phase input

• 0.5–7.5 hp (0.37–5.5 kW) constant torque, 208/230 V, single-phase

input

• 0.5–30 hp (0.37–22 kW) variable torque, 208/230 V, single-phase

input

• 2–40 hp (1.5–30 kW) constant torque (50 hp variable torque),

208/230 V, three-phase input

This bulletin covers the programming, monitoring, diagnostics, and

operation of the ALTIVAR 58 drive controllers with the keypad display,

part number VW3A58101U. Additional functionality can be obtained by

installing the analog I/O option card (part no. VW3A58201U) or the digital

I/O card (part no. VW3A58202U). The additional functionality provided by

these option cards is documented in this bulletin.

For other I/O option cards and communication option cards and for

information on programming the additional parameters available with

those cards installed, refer to the manual provided with the card.

Certain modes, menus, and operations can be modified if the drive

controller is equipped with these options. Consult the documentation

pertaining to each of these options.

See Appendix B for a complete list of options and accessories.

This keypad display is used on the drive controllers found in Table 1 on

page 8. For installation, wiring, start-up, and maintenance, consult

Table 1 for the applicable drive controller instruction bulletin. Also consult

the instruction bulletin provided with the I/O extension card or

communication card if applicable.

1 2 3 4 5 6 7 8 9 10 11 12 ... 111 112

Žádné komentáře

Schneider Electric Altivar 58 VW3-A58101 Uživatelský manuál Strana 7